djrock

ok, since the one it will be replacing was manufactured in April 19, which was about 4 months old when I got it.

Ok thanks, since the company I got it from are saying I am wrong with the date. Am I right in thinking cause its been sat on a shelf for nearly 3 years I should ask for a more recent one?

Hi, I recently got this Yuasa 7Ah battery, Is the code on the top of the battery still the date code? If so am I right that the date it was manufactured on was 21/11/19? Thankyou

Hi, I am not sure, don't think it does areas, just Levels. :'>

Hello, I have been testing a newly installed by me 9651en. I am writing a quick reference guide for it. I have a question about unsetting it, when I enter from a Final Exit zone (entry timer starts) and let the timer expire or go on and trigger a Normal Alarm Zone the alarm goes off. When I enter the code at the keypad it asks if you want to unset so you have to press tick, if you don't it stays set. Why does it ask you this? I would think if you start the entry timer you would want to unset it as normal? Is there a setting to change this? Thankyou :'> djrock

Hi, ok, that's good it's normal. Thankyou Djrock

Hello, I got a new/old stock 9651en for a friend, in the log around about the start there is a EEPROM fail then there are several other entries like tampers, pa zone open. Then there is entries that I know I have caused like system startup, lid tamper, engineer on site. Roughly where I started generating entries in the log there has not been another mention of EEPROM fail. Is it normal to have EEPROM fail at the very start of the log? Thankyou Djrock