Virtual RIO addresses are not related to RF Portal addresses.
The virtual RIO address will be the next availableaddress on the system
Menu 51.60.1 to reassign the virtual rio addressing.
For the SHK8M switch 4 (test) in the off position. Set the panel up for learning the RF device serial, install the battery, press the tamper for a few seconds and release.
That's confusing Matt!
The old RF RIO (C076) is seen by the systems as a RIO and is programmed by connecting a keypad locally to its programming header.
There are two RF portal models:
C077 Used on G2 series only and programmed in panel menus.
C079 Used on G2 or Dimension panels and programmed in panel menus.
C079-2 (new rev of C079)
CG, I'm cringing each time you start a new topic...
I've looked at some UDL programs and signalling TCD's, but couldn't bring myself to openly discuss the issues uncovered.
These are freely available from Honeywell. Hopefully my posted links will work:
The older TouchCenter CP040
CP040
The new TouchCenters CP041 and CP042:
CP041-CP042
You need Honeywell's conversion program to convert your files into a format recognised by the keypad. Also, the SD card needs to be FAT16 and small capacity - something like a 32MB will work. There are two different conversion programs for the different keypad types.