SouthernBrad
-
Posts
180 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by SouthernBrad
-
-
On 10/31/2017 at 00:04, AdrianMealing said:
Wireless detector without off the wall tamper does not comply to regs, just saying
Beat me to it.
-
I was going to say something similar to Nova.
AMG Systems have made 485 over fibre converters for the Galaxy in the past. If its in another building might be worth seeing if they have any spare fibre cores of the buildings are linked via fibre.
-
Sounds daft but have you let the system set with the circuit omitted, Then unset it?
-
On 10/31/2017 at 18:16, al-yeti said:
Because they won't pay for upgrade of course, but great as is
Most of it is still running trouble free to be honest. They will most definitely upgrade when the time comes.
When it's being used in so many stores and with each store having half a dozen or more units, it usually takes time for people to find an equivalent they're happy to roll out. -
Plenty still out there in the field, we have a national contract where most individual sites have about 6-8 Units still used with a couple of Keyboards.
I always found them pretty straight forward to work on.
-
We usually use the M12's and have not had any issues.
I also have had them at home for about 3.5 years and have been trouble free. They are also one of the better looking detectors too in my opinion. -
On 9/19/2017 at 19:50, PeterJames said:
I love those, with the little bits of nuts and nougat all covered in a solid chocolate.
Not bad, plus they've been reduced in the Tesco near me.
-
Welcome dave, Hows the Blue triangle treating you?
-
We used to do this on a National companies stores main entrance shutter.
When system was set the shutter controls didn't work.
System was Armed & Disarmed external via Max reader. -
As mentioned, main points for me would be the noise from the NVR's fans and the height of the cameras.
Height also for the IR range as I assume they'll be anti vandal domes. The range won't be much good by the time it reaches the floor. A metre or two lower can work wonders. -
Was going to say the same as Jim, Looks like a Ganz
-
Hi Juan,
I've found the outputs function on the app to be useless. Honeywell did update the app a little while ago which i was hoping would clear the "Panel Firmware upgrade required" message. I get this message even though my firmware is well within what they require as a minimum.Although the Virtual Keypad works no problems at all so you could always control outputs from engineer mode or configure a link to a user code or A-B buttons.
-
Hi Josh and Welcome. We are both in the same area, you'll be fine with PIDS.
-
I saw this at the show, had a good talk through it with one of your chaps.
Looks like a good bit of kit. -
Welcome xxxx, bet i now what big company that is...
-
Will have to try that App too.
We used to only really use DM DVR's/ NVR's now we don't use any apart from some clients that request them.
Mainly use Truvison now,App for that is good too.
-
As above the ECS card is more applicable to the Security industry and as Chopper mentioned if you've sat the iosh safetly passport test or completed an NVQ L3 in the past year or few years you do not have to sit the test.
-
We've been using alot of Truvision IP kit lately and seems to be really good.Even the 1.3MegaPixel cameras are superb picture quality.
-
Thats strange,how old is the PX? I know with SV 4.51 there were some issues with it coming from factory with a few alarms set to signal which are turned off in the Tel no. menu in menu 99.
-
So you want to reuse the existing Dualcom? If it's on a PX i don't think it'll be sitting on the XIB bus.
I'd also hope they've quoted to replace the data cabling as it'll more than likely be standard SC8 in place. -
Was going to say the same as James
-
What Baluns are they?
You mentioned a PSU are they active baluns each end? -
It's only grim if you're doing it for peanuts though.
You'll need a newish van to avoid LEZ
Just got myself an autopay congestion charge account (so never need to worry about forgetting)
Even Westminster does a trade permit, albeit for £24 a day.
So agreed would be **** if you had to take that lot out of £20 an hour!
I wouldn't be in there for peanuts,no way.
Our vans are changed every 4 years anyway, being on the cards you tend to get those bits payed for fortunately.
-
Sounds like a great opportunity, decent kit.
Working in central is too grim though.
RIO NOT communicating "missing rio0103"
in Detector Queries (Public)
Posted
As mentioned measure the systems current especially in an alarm condition.
Also check the address pot on the rio that it is definitely clicked onto the number you require.