Guest barryrendell Posted July 19, 2005 Share Posted July 19, 2005 hi barry here just wanted to ask i woke this morning and the alarm panel was beeping and i thought it was the batterys, ibought some new ones and put them in and it still beeps every 5 to 10 sec sometimes one beep then two and then three and back to one?. strange!!!!! looked at the manaul and no troubeshooting i have tried resetting it with the master code and it dont sound right when you touch the keys any ideas Link to comment https://www.thesecurityinstaller.co.uk/community/topic/6832-tp-800-master-alarm/ Share on other sites More sharing options...
Service Engineer Posted July 19, 2005 Share Posted July 19, 2005 Sounds like its in Walk test mode..? ........................................................ Dave Partridge (Romec Service Engineer) Link to comment https://www.thesecurityinstaller.co.uk/community/topic/6832-tp-800-master-alarm/#findComment-61456 Share on other sites More sharing options...
Guest barryrendell Posted July 30, 2005 Share Posted July 30, 2005 hi its barry again...have tried to set this thing without any luck...also cannot get a new panel for this model....would i be able to use any panel with the existing fitments and wiring regards barry Link to comment https://www.thesecurityinstaller.co.uk/community/topic/6832-tp-800-master-alarm/#findComment-62855 Share on other sites More sharing options...
Service Engineer Posted July 30, 2005 Share Posted July 30, 2005 You can replace the panel with the majority of those available to the DIY'er, and still keep all existind devices and sounders. ........................................................ Dave Partridge (Romec Service Engineer) Link to comment https://www.thesecurityinstaller.co.uk/community/topic/6832-tp-800-master-alarm/#findComment-62858 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.