Jump to content
Security Installer Community
Sign in to follow this  
Guest rafal

How to wire Odyssey 3 to Power 832

Recommended Posts

Guest rafal

Hi

I want to connect Odyssey 3 to Power832 /with 2 expanders/.

Odyssey requires:

+VE supply

-VE bell

-VE tamper

0V

-VE stobe

PC5015 has only Bell Output.

Could you advise on wiring plese.

Have I chosen the wrong bell box?

Thanks in advance.

Rafal

Share this post


Link to post
Share on other sites
Guest Hyrava

Never wired Odyssey 3 to Power832, but maybe this works:

+VE Supply -> AUX+

0V -> AUX-

-VE Bell -> Bell-

-VE Strobe -> Bell-

-VE Tamper -> Expander TAM

or

-VE Tamper -> any available Zone with resistor in series.

Share this post


Link to post
Share on other sites
Hi

I want to connect Odyssey 3 to Power832 /with 2 expanders/.

Odyssey requires:

+VE supply

-VE bell

-VE tamper

0V

-VE stobe

PC5015 has only Bell Output.

Could you advise on wiring plese.

Have I chosen the wrong bell box?

Thanks in advance.

Rafal

34749[/snapback]

I think you may have a non-UK version of the Power 832. It is not ideal, but you may have to connect +VE and -VE to Aux + and -, and use the programmable outputs to connect to Bell- and Strobe -. You could then use tamper return to switch a relay on a 24hr zone to set up SAB tamper. Just be aware that you will be putting a high load on the AUX circuit - check the load in alarm to ensure that you will not blow the Aux fuse. If you are at all unsure on how to do this, then contact a local installer.

D7

Share this post


Link to post
Share on other sites

You need a relay to get the tamper to work on the Power Panels if Using Odyssey 3 sounder

Strobe goes on PG2 programmed as [10] System Event...

I think you may have a non-UK version of the Power 832.

Non of the DSC Power panels have a tamper return like UK Panels it use's a resistor instead ;)


There are no stupid questions, but there are a LOT of inquisitive idiots.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.