I have a pyronix euro mini hardwired system which I'm trying to connect a UR2-WE receiver to I can add additional wireless sensors. How do I wire in the UR2, and secondly, how do I set up on the alarm the UR2

Edited October 23, 20223 yr by sixwheeledbeast
fix topic title

5 hours ago, Adam0Enya said:

I have a pyronix euro mini hardwired system which I'm trying to connect a UR2-WE receiver to I can add additional wireless sensors. How do I wire in the UR2, and secondly, how do I set up on the alarm the UR2

You wire the 2 on board zones to the panel, fault to a 3rd zone and follow the manual to add detectors 

Edited October 23, 20223 yr by Imnotshankled

20 hours ago, Imnotshankled said:

You wire the 2 on board zones to the panel, fault to a 3rd zone and follow the manual to add detectors 

Thanks for the advice! Are you able to draw a diagram as I am not so clued up with it. Also, how do I program via the keypad to recognise the sensor is for entry exit? 

6 hours ago, Adam0Enya said:

Thanks for the advice! Are you able to draw a diagram as I am not so clued up with it. Also, how do I program via the keypad to recognise the sensor is for entry exit? 

I would recommend getting a engineer in to wire it if you are confused 

But I hope this helps 

 

  wire output a to zone 8

Wire output b to zone 9

And wire fault output to zone 10

using the provided diagram 

 

Connect 12v and 0v to panel 12v and 0v 

 

Connect arm to pgm on panel