Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Honeywell Accenta 8 G4 Mini Alarm System

Dave S
in Members Lounge (Public)

Featured Replies

Hi, I am looking for help please. I have installed the above alarm at home and have a problem. I am getting the fault code ' Tamper Fault Lockout' I suspect the issue is with the bell box as everything else looks to be ok. It is a Honeywell AG6 Bell Box and when installing there was a sheet inside the box saying to wire differently to the installation manual. I have also tried another wiring diagram I found on a previous post n here but still no joy. It appears that there is only 1x tamper wire coming back from the bell box - Is this correct? I have the following terminals n the bell box - TR-, S-, V+, V-, ST- Can anyone confirm to which the T A D B wires from the control panel should go to?

 

Also any other ideas welcome. I have checked the tamper circuit from the Keypad and the PIR's and they are both ok and I have removed the auto dialler for now.

 

Any help would be much appreciated as I am all out of ideas.

 

Regards

 

Dave

Edited by Dave S

link out your tamper circuits to narrow it down first

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

  • Author

Hi James. Tried that already for pir sensors and key pad but not sure how to link out the bell box. 

Hold off neg to tamper return

t and a iirc

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

  • Author

Just put the meter across t & a and there is a open circuit. 

  • Author

I have T to tr-, A to v-, D to v+, B to s- and - to st-

yes link t to a. Disconnect all the san wiring first and while powered down etc

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

sab autocorrect sorry

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

  • Author

Hi James. Thanksfor your help. Broken wire to the bell box. New length of cable run in and it's sorted

cheers

 

Dave

Create an account or sign in to comment
Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Terms of Use.

I accept

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.