Guest Posted July 15, 2004 Share Posted July 15, 2004 anyone had the error message FREQUENCY IMBALANCE on a mosaic 8136 when trying to reprog idis lims???hitting a brick wall,as no one knows,not even scany Link to comment https://www.thesecurityinstaller.co.uk/community/topic/2837-scany-mosy/ Share on other sites More sharing options...
Service Engineer Posted July 15, 2004 Share Posted July 15, 2004 Are the LIM`s on different power supplies .. ? ........................................................ Dave Partridge (Romec Service Engineer) Link to comment https://www.thesecurityinstaller.co.uk/community/topic/2837-scany-mosy/#findComment-17691 Share on other sites More sharing options...
Guest Posted July 15, 2004 Share Posted July 15, 2004 NO,HAVE CHANGED LIMS BEFORE ON THIS SYSTEM WITH NO PROBS UNTIL NOW,MUST ADD THIS STARTED AFTER POWER FAIL WHEN BATT RAN TO 4VOLTS. TRYING NEW IDIS EXPANDER TOMORROW Link to comment https://www.thesecurityinstaller.co.uk/community/topic/2837-scany-mosy/#findComment-17694 Share on other sites More sharing options...
engineery Posted July 16, 2004 Share Posted July 16, 2004 any luck with that today? Any comments / opinions posted are my opinion only and do not represent those of my employer or Company Link to comment https://www.thesecurityinstaller.co.uk/community/topic/2837-scany-mosy/#findComment-17730 Share on other sites More sharing options...
Guest Posted July 16, 2004 Share Posted July 16, 2004 sorted,was the idis expander card,it was also programming all the lims as the last one you had progd,eg.address lim Z24 then all lims default to Z24,very strange indeed but fixed by replacing idis card Link to comment https://www.thesecurityinstaller.co.uk/community/topic/2837-scany-mosy/#findComment-17733 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.