Guest anguscanplay Posted September 1, 2008 Share Posted September 1, 2008 Suppose you could link it out, then they get robbed and the loss adjuster finds panel lid link out, insureres wont pay out as system has one little deveation goes back to your compnay who finds out you where the last engineer on site pins blame on you, gets rid for gross misconduct shows up on your vetting cant get another job.As the saying goes 'if in doubt link it out' no doubt, but thats not what were discussing here Link to comment Share on other sites More sharing options...
lawandorder Posted September 1, 2008 Share Posted September 1, 2008 Suppose you could link it out, then they get robbed and the loss adjuster finds panel lid link out, insureres wont pay out as system has one little deveation goes back to your compnay who finds out you where the last engineer on site pins blame on you, gets rid for gross misconduct shows up on your vetting cant get another job.As the saying goes 'if in doubt link it out' How are you ever going to get back into engineer mode if you short the A/T? Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted September 1, 2008 Share Posted September 1, 2008 How are you ever going to get back into engineer mode if you short the A/T? he isnt - someone mislead him that "call engineer" could be the lid tamper open (it isnt, an open tamper just bleeps and does nothing) ....... Link to comment Share on other sites More sharing options...
lawandorder Posted September 1, 2008 Share Posted September 1, 2008 How are you ever going to get back into engineer mode if you short the A/T? Yes I think you're right Angus, as I recall you cannot exit engineer mode with a lid tamper. I'm sure I have come across this problem with a 9100 before (call engineer flashing) but can't for the life the life of me remeber what it indicates. Is it the Auxillary zone open when trying to exit engineer mode or am I talking b******? Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted September 1, 2008 Share Posted September 1, 2008 Yes I think you're right Angus, as I recall you cannot exit engineer mode with a lid tamper.I'm sure I have come across this problem with a 9100 before (call engineer flashing) but can't for the life the life of me remeber what it indicates. Is it the Auxillary zone open when trying to exit engineer mode or am I talking b******? cannot exit engineer mode with any tamper if your in engineer mode it means something on soak test flashes call engineer for tampers. line faults etc in customer mode Link to comment Share on other sites More sharing options...
Nova-Security Posted September 1, 2008 Share Posted September 1, 2008 cannot exit engineer mode with any tamperif your in engineer mode it means something on soak test flashes call engineer for tampers. line faults etc in customer mode QFA Only seen call engineer flash for a line fault. www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.