wilks-bfc Posted July 14, 2008 Share Posted July 14, 2008 We have a Gardtec 370 panel and when we came to set it last night, after we entered the code and pressed 1 (that disables upstairs) 4 was displayed on the panel - 4 is the pir in the kitchen. Now i know this means this sensor is activated, but there is nothing there to activate it and now we cant set the alarm when we go out. Can anybody advise please? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/24067-gardtec-370-panelsensor-activated/ Share on other sites More sharing options...
alterEGO Posted July 14, 2008 Share Posted July 14, 2008 We have a Gardtec 370 panel and when we came to set it last night, after we entered the code and pressed 1 (that disables upstairs) 4 was displayed on the panel - 4 is the pir in the kitchen.Now i know this means this sensor is activated, but there is nothing there to activate it and now we cant set the alarm when we go out. Can anybody advise please? You Have a fault on that zone that needs looking at. It could be 1 of many things from the Pir sensor, cable, panel. We cover your area, feel free to give us a ring if you would like the system repaired. Regards Aaron Protex Fire & Security Ltd S.S.A.I.B Approved 0800 043 6739 or 0161 628 0033 www.protexalarms.com Link to comment https://www.thesecurityinstaller.co.uk/community/topic/24067-gardtec-370-panelsensor-activated/#findComment-204751 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.