scoobs Posted December 16, 2007 Share Posted December 16, 2007 Please can somebody help me!! I'm doing a digi takeover on a caslecare-tech 1600 and am having a few problems. I have reprogrammed the whole alarm system, and everything seems to be working fine except I get an F5 on the display, I understand this is a comms fault I have replaced the chip in the digi with a standard chip from the alarm recieving centre. Am I going to have to programme my own chip specifically for this panel? If so can someone explain step by step on how I go about programming a abacus chip blower to the required spec for the castlecare-tech 1600 panel. Many thanks in advance Scoobs Link to comment https://www.thesecurityinstaller.co.uk/community/topic/21669-castlecare-tech-1600/ Share on other sites More sharing options...
magpye Posted December 16, 2007 Share Posted December 16, 2007 F5 on the display, I understand this is a comms fault I think you will find that F5 = Line Fault Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/21669-castlecare-tech-1600/#findComment-186396 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.