Hi all

Just bought a brand new galaxy g3 and 2 RKP's. I am about to buy a rio and the following sensors:

6x PIR detectors

2x Dual Tech detectors

9x Viper vibration detectors

2x Smoke detectors

1X Heat detector

2x Personal Attack buttons

1x magnetic door contact

1x internal sounder

1x external bell box and sounder

As we are currently renovating, my builder will be placing the 8 core LSF for each detector (bearing in mind radiators for pir's etc). I know about the belden cabling for the RKP's. He will be wiring them all to a central location in the downstairs cloakroom, where there will be a fused spur.

Basically I need an engineer to wire the detectors to the panel and start it all up, as even though i've been doing a lot of research i'm not too confident with the resistors and especially don't want to touch the mains. Can you guys give me a price for such a job? I am based in Hendon, North London.

Thanks

Hi jezf,

the galaxie range is restricted for sale to 'trade only'. for this reason due to current concerns over legal ownership of such panels, with all due respects nd no defidence to you we can not permit anyone to gain assistance, as it could make this site liable to legal action should it be subsequentally provd as stolen.

i and the membership do accept you have obtained it in good faith and no slur or accusation is intimated towards you

so this post will be closed

Hi all

Just bought a brand new galaxy g3 and 2 RKP's. I am about to buy a rio and the following sensors:

6x PIR detectors

2x Dual Tech detectors

9x Viper vibration detectors

2x Smoke detectors

1X Heat detector

2x Personal Attack buttons

1x magnetic door contact

1x internal sounder

1x external bell box and sounder

As we are currently renovating, my builder will be placing the 8 core LSF for each detector (bearing in mind radiators for pir's etc). I know about the belden cabling for the RKP's. He will be wiring them all to a central location in the downstairs cloakroom, where there will be a fused spur.

Basically I need an engineer to wire the detectors to the panel and start it all up, as even though i've been doing a lot of research i'm not too confident with the resistors and especially don't want to touch the mains. Can you guys give me a price for such a job? I am based in Hendon, North London.

Thanks