[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

On 25/08/2020 at 23:18, james.wilson said:

Pretty much everyone knows galaxy, if they dont know it its like saying they have never heard of ford as a mechanic. Not knowing it well is different. IMO people should specialise do what they do and do it well, not ive seen one of these before how hard can it be. Got the same issue with my Bosch Boiler at home, needed a specialist and after a while found one. 

They use hkc here , almost everywhere , probably they just did not want to do it

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

Im easier with software , well that radiator is loose , I have never seen fitted radiator only on one one side hanging Freely on the other. 

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

Just for the update and help for other people : reflashing firmware solved the problem. thanks

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

local engineers dont use this brand...no help from them

 

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

Will Galaxy Dimension programming cable help ? Will I be able to upload newer firmware and then get default codes from the system ? thanks

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

Understand , do you know who can help? thanks

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

I got pcb , adaptor and casing for 40 and keypad for 50

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

Do you know how to check that ? should I contact ADT in UK ? im from Ireland.

 

 

thank you

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

Hi, Thanks for help, 

 

sellers does not know the codes it was sold untested.

 

 

[Honewell Galaxy Flex 050 v.3.37 factory reset or code]

Hi,

 

I have recently bougt honewell  flex 50 c006-s-c1 v3.37 , second hand and mk8 kepad , system starts ok , but ? need to find a user code to enter into system.

Is there a way to factory reset the pcb or keypad with hardware jumpers even ? Is the code stored on pcb itself or in the keypad?

 

When it starts it is comunicating with keypad, configuring please wait-  and then it shows time date and ADT name at the top. Tried few known ADT codes without luck.   Beeps every other sec. Red  LED flashed every other sec on the pcb a well.

 

 

Is the big aluminium radiator in the middle of PCB a TAMPER ? Does it need to touch the boards? it is just hanging in the air now on one side marked in yellow circle on pic.

 

I have Flex 050 metal case version.

 

I would like to install it in the house.

 

Im a newbie sorry for bother, this is my first alarm project.

 

Thank you again for help guys.