Hi All, I'm going to put in a Galaxy Flex 20 system into my home and have struggled to find a supplier on line who would confirm my BoM list as being compatible and appropriate. There is a mix of wired (Cat6) and wireless sensors. If anyone has a view on the BOM below I'd appreciate it. I don't want buy devices which wont work with the system, or miss things out which I need;
The Kit I need; Galaxy Flex 20 Grade 2, Medium, English Language:
· Galaxy Flex 20 Control Panel and Housing with Power Supply, C005-Medium-EEnglish Flex 20. Medium Box to house the following (Hybrid, wired and wireless solution) V3.XX minimum
· User Interface; Galaxy TouchCenter Plus flush mount CP046-00
· Wall mount for Galaxy TouchCenter Plus A045
· MK8 key pad CP050-00-01
· PSTN Trigger Module A071-00-01 and Output Options Board A074-00-01
· Ethernet Module A083-00-02
· GSM/GPRS Module, Galaxy Flex direct mount Ethernet module A081-00-01 V3
· RF Portal (Galaxy Flex direct mount RF portal PCB) A073-00-01
· Duel Tech Motion Sensor IS312 and IS312B Wall and ceiling mount bracket x 4 of each with detector with Pet Immunity to 36kg
· ISN3010B4 Camera PIR x 1 Wired). PE 1800IP Alarm Receiver (Are these compatible with the Flex 20). I’d like to use the Cat6 if I can so please advise of an alternative PIR/Camera or just PIR if there are options.
· Deep discharge battery protection module (optional on Flex)
· Wired Door Contact VIPER GLX + Contact x 1 part number PC.09004.20
Wireless:
· YX0-0004 Piezo Shock Sensor x 4 part Number PC.09003.50
D08 M Door Contact x 6
· 4 button Key Fobs TCC8M x 4 (Multi-Function)
· Basic Key Fob, YX0-0004 x 2
· Flood Sensor DET8M x 1
· Carbon Monoxide Detector C08M x 1
· Smoke detector DF8M x 1
· Separate Panic Button TCPA1B x 1
· Bell Unit (also internal sounder, run from same board)
Advise on any cabling / software needed to connect the above
Remote Programming
· R058-CD DG x 1 User Management Suite, Galaxy User Management Suite software with USB dongle