[Ade Captiv8-20 Box Tamper Fault]

Having spent ages checking everything i have come to the conclusion that the pcb must be faulty.

 

Obviously this alarm is discontinued so can anybody recommend a suitable replacement for this alarm?

 

It has 15 id-plus zones with one remote keypad.

 

To keep work to a minimum i would just like to replace the panel and rkp if at all possible.

[Ade Captiv8-20 Box Tamper Fault]

not the keypad just the main box to reset the engineer and managment codes

[Ade Captiv8-20 Box Tamper Fault]

I have metered the switch and its working ok.

The switch has a spring on it so just to be sure i have taped the tamper switch down but its still reporting a box tamper fault.

[Ade Captiv8-20 Box Tamper Fault]

The only thing i have done is open the main box, reset the codes and closed the box.

It says it has a box tamper fault but i have refitted the link to the 2 tamper contacts within the box.

It had no faults displayed before i opened the box.

[Ade Captiv8-20 Box Tamper Fault]

i recently moved into a property that had an ADE Captiv-8 alarm system fitted however as the property was empty i did not have teh alarm codes.

I reset the codes as per the engineering manual instructions: -

 

 

The engineer code and manager code have now been reset to default, i can scroll through the enginners facilities ok however i cannot access the managemnt menus as it now says it has a box tamper fault.

I have removed the link above and refitted the link to the tamp circuit.

Anybody know how to clear this fault it was not present before i did the reset as there were no faults displayed on the rkp.