-
Posts
237 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by djrock
-
-
7 minutes ago, sixwheeledbeast said:
As far as I am aware they are still Year Month Day Batch, yes
Ok thanks, since the company I got it from are saying I am wrong with the date. Am I right in thinking cause its been sat on a shelf for nearly 3 years I should ask for a more recent one?
-
-
Hi, I am not sure, don't think it does areas, just Levels.
:'>
-
Hello, I have been testing a newly installed by me 9651en. I am writing a quick reference guide for it.
I have a question about unsetting it, when I enter from a Final Exit zone (entry timer starts) and let the timer expire or go on and trigger a Normal Alarm Zone the alarm goes off. When I enter the code at the keypad it asks if you want to unset so you have to press tick, if you don't it stays set.
Why does it ask you this? I would think if you start the entry timer you would want to unset it as normal? Is there a setting to change this?
Thankyou :'>
djrock
-
Hi, ok, that's good it's normal.
Thankyou
Djrock
-
Hello, I got a new/old stock 9651en for a friend, in the log around about the start there is a EEPROM fail then there are several other entries like tampers, pa zone open. Then there is entries that I know I have caused like system startup, lid tamper, engineer on site.
Roughly where I started generating entries in the log there has not been another mention of EEPROM fail.
Is it normal to have EEPROM fail at the very start of the log?
Thankyou
Djrock
Yuasa 7Ah Battery
in !!..DIY Installers..!!
Posted
ok, since the one it will be replacing was manufactured in April 19, which was about 4 months old when I got it.