whizzer
-
Posts
58 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by whizzer
-
-
check you have 12v at the keypad.
I personally would recommend changing the panel and keypad, buy a 9651 it has lcd display and is easier to use and read.
-
nice to see some intelligent answers
-
classic sign of builder etc putting in a cable or cables during plastering or alterations , youd use them too !! ha ha
-
anybody on here do any subby work ?
I need some advice on day rates , could you PM me I just need a brief answer. ta
-
easy way greg , get a glamourous assistant to stand at the keypad and enter your user code while you walk in front of PIR's , get said assistant to shout which LED lights up when you are in a room.
bear in mind you may have to enter code before exit time expires and repeat process, or do 1 at a time .
In future I would get the professionals in for servicing or faults, good luck.
-
I have to program descriptions onto a zonemaster 600, after a task downloading the link from kentec onto windows 10 I have got loop explorer.
Is it as easy as connecting to the pcb and clicking connect to panel on loop explorer ?
Do I need to do anything with the panel ?
-
do what most alarm engineers do , link it out - fault cleared !! no ladders needed
-
anybody got any thoughts on wireless cctv cameras such as Arlo stuff ? or any recommendations for cameras to buy.
I have only installed or worked on wired stuff as I would think this is more stable, not sure about battery operated cameras.
-
Ah yes !! the customer that can find a camera on ebay !!
been on many CCTV installs where the client has said he or she can get cameras for 20-30 pound !
with the internet as it is now and with end user able to buy cheap kits its becoming more regular. I have seen some right bodge jobs with people trying to put kit in. after the correct engineers have finished though there is no comparison , from bnc or rg45 plugs a proper job is a proper job.
-
both if your been picky but found the others hard work, is that better
-
I would say C TEC
or SMS are just as good
-
-
Just find I-ON simple.
After going to a site which needed an upgrade from a old wired system which also required more detection the hybrid I found was very good.
It was an old cottage (large) which to get cables around would have been near impossible without looking horrific , adding the wirefree kit alongside the wired stuff really worked, had redcare on too which was always a worry with radio stuff.
I suppose I have never worked much on others but I found the visonic stuff hard work although that was working on faults etc (I have never installed one from scratch).
there was a pyronix type which I found tricky but got there in the end ! again not installed from scratch.
-
is that Kentec ?
PM sent,
, just seen this
-
ta,Model ?
-
-
For me Scantronic I-ON range and hybrid are good
-
got a site with a H.264 PRO2 dvr , it wont boot up and the SEQ and PLAY/STOP buttons are lighting up when i'm trying to power up.
Anybody any ideas on this or a tech support No I can call ?
if somebody knows but would prefer to email me please let me know and I will provide my email addy.
-
battery change every year !!!! dom littlewood will be on your case mate
-
will do , just wanted to know if it could be done by just defaulting codes as I wasn't aware you couldn't.
-
ok thanks, is the only way to save existing programming downloading onto laptop and then uploading after crashing ?
got a takeover to do and I was told the type of galaxy cannot be defaulted the way I know.
-
can all versions be defaulted whilst saving existing programming ?
-
is it possible to default ENG code on G3 the same was as the older panels ?
or do you have to crash the lot.
-
understand that mate that's why I left my email if anyone can advise.
I will email the trade and go from there .
Subby day rates
in Members Lounge (Public)
Posted
I find that hard to believe !