whizzer

I find that hard to believe !

check you have 12v at the keypad. I personally would recommend changing the panel and keypad, buy a 9651 it has lcd display and is easier to use and read.

nice to see some intelligent answers

classic sign of builder etc putting in a cable or cables during plastering or alterations , youd use them too !! ha ha

anybody on here do any subby work ? I need some advice on day rates , could you PM me I just need a brief answer. ta

easy way greg , get a glamourous assistant to stand at the keypad and enter your user code while you walk in front of PIR's , get said assistant to shout which LED lights up when you are in a room. bear in mind you may have to enter code before exit time expires and repeat process, or do 1 at a time . In future I would get the professionals in for servicing or faults, good luck.

I have to program descriptions onto a zonemaster 600, after a task downloading the link from kentec onto windows 10 I have got loop explorer. Is it as easy as connecting to the pcb and clicking connect to panel on loop explorer ? Do I need to do anything with the panel ?

do what most alarm engineers do , link it out - fault cleared !! no ladders needed

anybody got any thoughts on wireless cctv cameras such as Arlo stuff ? or any recommendations for cameras to buy. I have only installed or worked on wired stuff as I would think this is more stable, not sure about battery operated cameras.

Ah yes !! the customer that can find a camera on ebay !! been on many CCTV installs where the client has said he or she can get cameras for 20-30 pound ! with the internet as it is now and with end user able to buy cheap kits its becoming more regular. I have seen some right bodge jobs with people trying to put kit in. after the correct engineers have finished though there is no comparison , from bnc or rg45 plugs a proper job is a proper job.

both if your been picky but found the others hard work, is that better

I would say C TEC or SMS are just as good

ha ha

Just find I-ON simple. After going to a site which needed an upgrade from a old wired system which also required more detection the hybrid I found was very good. It was an old cottage (large) which to get cables around would have been near impossible without looking horrific , adding the wirefree kit alongside the wired stuff really worked, had redcare on too which was always a worry with radio stuff. I suppose I have never worked much on others but I found the visonic stuff hard work although that was working on faults etc (I have never installed one from scratch). there was a pyronix type which I found tricky but got there in the end ! again not installed from scratch.

is that Kentec ? , just seen this

ta,Model ?

can someone please tell me what this panel is ??? looks morley ish

For me Scantronic I-ON range and hybrid are good

got a site with a H.264 PRO2 dvr , it wont boot up and the SEQ and PLAY/STOP buttons are lighting up when i'm trying to power up. Anybody any ideas on this or a tech support No I can call ? if somebody knows but would prefer to email me please let me know and I will provide my email addy.

battery change every year !!!! dom littlewood will be on your case mate

will do , just wanted to know if it could be done by just defaulting codes as I wasn't aware you couldn't.

ok thanks, is the only way to save existing programming downloading onto laptop and then uploading after crashing ? got a takeover to do and I was told the type of galaxy cannot be defaulted the way I know.

can all versions be defaulted whilst saving existing programming ?

is it possible to default ENG code on G3 the same was as the older panels ? or do you have to crash the lot.