Wyatthaplo

Old post but trying to get montex working and having a bit of trouble. COM IP is on com port 1 so dont have an option for baud rate. using arc tel no 1 as the IP address i am at. Do i need to open the port 10001 on the site i (and montex) is on?

I would class alarms as part of "control" of the building personally. We are always told to do it on commercials but not domestics...yet.

What are peoples thoughts on this? It has never been an issue but was just having a general chat with the guys at new company. Was doing a google search and came across this http://www.planningportal.gov.uk/buildingregulations/approveddocuments/partm/faqs Q. Should the height of trip switches and consumer units (fuse boxes), which are normally positioned at least 1200mm above floor level to avoid tampering by children, be within the 450mm to 1200mm height range specified in Section 8? A. AD M does not offer guidance on the positioning of trip switches and fuse boxes. A new Part of the Building Regulations, Part P 'Electrical safety', with accompanying guidance in an Approved Document, came into force on 1 January 2005. Part P 'Electrical safety' can be found on the Planning Portal. Section 10.5.2 of BS 8300:2001, 'Design of buildings and their approaches to meet the needs of disabled people - code of practice' states that: electrical socket outlets, telephone points and TV sockets should be located between 400mm and 1000mm above the floor. Switches for permanently wired appliances should be mounted between 750mm and 1200mm above the floor. Meters should be mounted between 1200mm and 1400mm from the floor so that the readings can be viewed by a person standing or sitting. Pre-pay meters should be accessible but protected from tampering by children. All switches and controls that require manual dexterity should be between 750mm and 1000mm from the floor, and the maximum height of simple push button controls which require limited dexterity should be 1200mm. Near bottom looks like domestic may have to go to 1200 height for keypads.