Jump to content
Security Installer Community

Galaxy Dimension Dial Capture Dualcomm


Chopper81

Recommended Posts

Hi Guys (and girls)

Im swapping out a px500 for galaxy dimension. Ive no problem with programming the zones etc but the current px500 is connected to the dualcomm by the dial capture feature. This is something im not massively familiar with. Everytime ive used a communicator (digi dual redcare or emizon) ive done the programmed outputs to the pins on the communicator. How does the dial capture work? As it is at this moment in time the A and B terminals on the px500 are wired to the a and b terminals on the dualcomm, theres a plug on board on the dualcomm woth the phone line wired in and fire is signaling on pin 1.

I assume that i just copy the existing with reagrs to galaxy a and b to dial capture on the redcare but do i need to change any settings on the galaxy i.e. format tele number etc or is all that done through the dualcom.

Any help would be fantastic

* dial capture on the dualcomm i meant

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.