Hello, my new home is fitted with an omnicron 8000 alarm and keypad. Unfortunately, the previous owners didn't leave a user manual. Does anyone know how i can get a user manual so as to change codes etc...

Thankyou

I'm just looking for a user manual.

Personally, I would just bin it and fit something else as the Omnicron is not held in very high regard tbh.

Edited October 5, 200520 yr by Lurch

Are you using the alarm now, do you know the old user code ?

Reset

Prog function

Existing code

1

New code

Reset reset

and if this fails try a large hammer

yes, i am using the alarm now as i know the previous users' code. Would like to change though for peace of mind.

thanks PJF - job sorted! Also, i have a remote keypad which is lit up but doesn't appear to respond to any key pressing. Any ideas would be appreciated.

The RKPs for the omnicron are in my opion a pain, Only ever fitted one and could not get it to work, but luckily the customer sold the house before I got back to have another go.

If im correct the buttons are very stiff so have you tried pressing fairly hard(with a hammer).

and if this fails try a large hammer

71010[/snapback]

If im correct the buttons are very stiff so have you tried pressing fairly hard(with a hammer).

Who likes the hammer then......

Best thing for them, Its only a matter of time before it gives up or atleast the membrain wears out.

If I was garth 05 I would get it swapped now before he starts to decorate his new house, get a VR8 or simlar.

I have had mine over 20 plus years, never had a problem, mmmm well the siren outside has stopped working when the alarm is activated, any idea's.

Edited February 22, 20188 yr by Shaun Thompson
spelling