Guest DIYking Posted September 30, 2003 Share Posted September 30, 2003 I am new to this game and adding a rear bell box to an existing alarm system, do I need to connect the tamper return to the front box or can it go straight to the control panel ??? Link to comment Share on other sites More sharing options...
Steve K Posted September 30, 2003 Share Posted September 30, 2003 what sounders are you using? Steve Kendall Plymstock Security Systems CCTV, Intruder Alarms, Security Lighting & Access Control Covering Plymouth, Plymstock, Plympton, South Devon and South East Cornwall Link to comment Share on other sites More sharing options...
dinefwr Posted September 30, 2003 Share Posted September 30, 2003 Lookig at the Melcom engineers manual this week, I noticed there are two tamper feeds and return for 2 bellboxes. Link to comment Share on other sites More sharing options...
Guest DIYking Posted October 1, 2003 Share Posted October 1, 2003 The alarm sounder is a Texecom, and the instructions say connect the second bell to the first so they are in series. If I connect the second bell straght to the -Ve Tamper return on the control pannel, (both bells will be in parallel) and the rear tamper is activated will this bell sound only ?? and vise versa.. also I have a 12volt internal sounder on the system, this is connected to the +Ve, -Ve and the -Ve sounder trigger for the external sounder. If the tamper was activated say on the rear box would this internal sounder activate. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.