Guest plcman Posted August 20, 2004 Share Posted August 20, 2004 Several times i have had false alarms on my alarm, i have 3 magnetic door sensors wired in series on garage and shed approx 20 metres from panel. All doors are sound but i have had around 6 false alarms in the last few weeks, reset the alarm and it runs for several days with no problems. Are alarms prone to interferance and is there some suppressor, capacitor or resistor etc. Any help would be great. Thanks Andy Link to comment https://www.thesecurityinstaller.co.uk/community/topic/3363-false-alarms-with-accenta/ Share on other sites More sharing options...
neil.c Posted August 21, 2004 Share Posted August 21, 2004 Considering the low cost it is probably worth changing all three anyway, as a starting point. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/3363-false-alarms-with-accenta/#findComment-21197 Share on other sites More sharing options...
Guest plcman Posted August 23, 2004 Share Posted August 23, 2004 Thanks guys, resistance was high on circuit, checked all sensors and 1 found to be faulty, replaced with new one and now circuit is dead short when closed. Result Link to comment https://www.thesecurityinstaller.co.uk/community/topic/3363-false-alarms-with-accenta/#findComment-21476 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.