Dak3931 Posted April 20, 2008 Share Posted April 20, 2008 Due to the electricity going off in our area..my alarm activated once the electricity supply resumed. I tried to reset but the code was either wrong or would not be recognised. I isolated the system at the fuse box and initially that was okay. At 5 in the morning the outside box started to sound with random beeps. I removed the battery wires to stop annoying the neighbours and have disconnected the battery in the alarm panel. Is the next step an engineer or is there anything I can do to reset the code??? :!: Link to comment https://www.thesecurityinstaller.co.uk/community/topic/22951-veritas-alarm/ Share on other sites More sharing options...
FASTCAR Posted April 20, 2008 Share Posted April 20, 2008 Power the system back up again , mains first , and try again with your original code. Be careful around hazardous voltages. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/22951-veritas-alarm/#findComment-195350 Share on other sites More sharing options...
Dak3931 Posted April 20, 2008 Author Share Posted April 20, 2008 Power the system back up again , mains first , and try again with your original code.Be careful around hazardous voltages. Thankyou for your advice. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/22951-veritas-alarm/#findComment-195366 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.