looking to add an external G-TAG reader to the remote Key Pad of a gardtec 490X

the wires on the end of the cable from the reader are coloured white / red / yellow / black / blue / Green

the instructions state (for a cable length < 7.5m) that

RED goes to SET

BLUE goes to ANT

YELLOW goes to ANT

BLACK goes to OV

but the terminals labelled on the RPK are labelled

Terminal Block 2

A1

A2

Terminal Block 1

A3

A4

SET

D2

D1

0V

12V

ZONE

the red to SET and black to 0V are straight forward - but where do the BLUE and YELLOW go ?

Any Ideas

Edited January 24, 200818 yr by graham99114

looking to add an external G-TAG reader to the remote Key Pad of a gardtec 490X

the wires on the end of the cable from the reader are coloured white / red / yellow / black / blue / Green

the instructions state (for a cable length < 7.5m) that

RED goes to SET

BLUE goes to ANT

YELLOW goes to ANT

BLACK goes to OV

but the terminals labelled on the RPK are labelled

Terminal Block 2

A1

A2

Terminal Block 1

A3

A4

SET

D2

D1

0V

12V

ZONE

the red to SET and black to 0V are straight forward - but where do the BLUE and YELLOW go ?

Any Ideas

managed to find out

BLUE&YELLOW GO TO A1 & A2

RED goes to SET

BLACK goes to OV

managed to find out

BLUE&YELLOW GO TO A1 & A2

RED goes to SET

BLACK goes to OV

was it the instruction manual gave it away ?

nope - instruction manual details were as per in first post - eventually got the info for the supplier technical help line