Guest dflorence Posted December 30, 2006 Share Posted December 30, 2006 Hi, I hope some of you kind people may be able to help me. I have just moved house and have inherited an alarm fitted with a JSB regent 8 zone panel. The previous owner has left me with his user code no. but that is all. I have found the engineer manual for the system on the net but its far too complicated, all I want to do is change the master user code and perhaps add another code for our neighbours when we are away. The engineer manual tells me that to change the user code I should refer to the Regent user manual, which I do not have. If anyone could tell me the procedure to change the user code I would be grateful. Many thanks. Link to comment Share on other sites More sharing options...
Guest dflorence Posted December 30, 2006 Share Posted December 30, 2006 RegentUser.pdf Whay a brilliantly helpful site. Thank you!! Link to comment Share on other sites More sharing options...
newguy Posted February 2, 2009 Share Posted February 2, 2009 I need a user guide for the Regent 8 zone panel. Can anyone supply me with one as the previous link no longer works? Many thanks There's no substitute for experience .......... so all opinions welcome! Link to comment Share on other sites More sharing options...
Guest RJBsec Posted February 2, 2009 Share Posted February 2, 2009 Hope this helps. RegentUser.pdf Link to comment Share on other sites More sharing options...
newguy Posted February 3, 2009 Share Posted February 3, 2009 Hope this helps. Just the job! Thanks again RJBsec. There's no substitute for experience .......... so all opinions welcome! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.