monena

The sim is not provided by Risco.

I have a lightsys 6.09 with a GSM module. I am able to receive call from the alarm but i cannot receive SMS and i cannot control the alarm via SMS. Someone can help me? Thanks

Yes, They are compatibile. Risco support answers me.

The sensors are risco original. The models are 1PCT72X00000H.

I have tested all the sensors, i have 10 different Door sensors. But only two have the tamper problem. I have also removed the sensors from the radio list. Now the problem is that without tamper communication i am unable to re-add the removed sensors.

I have a board lightsys (i do not know the right version, if the First model or the second one) with written the code 1PC432M00000E. I get this board with firmware 5.21. now i have updated the board and the firmware now is 6.09. On this board I have to install an ip module. The module I have is the RP512IP. It has the firmware version 0.58. is the ip module compatible with my lightsys? Which Is the version of my lightsys ? I tried to install the module on the board and throught the bus i can see the module, but in the CS i am unable to see mac and ip. Someone can help me to undestrand better my situation? Thanks

Hello Everyone, After a very long renovation and subsequent complete rewiring of the alarm system, I have returned to activating the lightsys alarm. Unfortunately, however, some door opening detection sensors, connected via radio, continuously give the tamper alarm. In particular, 3 sensors out of 9 have this problem. What could have happened? I have already changed all the battery. Thanks for your availability. Best regards Simone