sparks-2012

I can do basic alarm installs but not had much experience with alarm fault finding but every ones got to start somewhere. The reason I asked on here is because people have experience with different alarms and could be a simple fix

Not sure. They moved in in February and hasn't worked but unsure if the previous owners had it working

This is the pir with model 8IR103. If you scroll down you can see a picture of the terminals https://www.citysecuritysystems.co.uk/honeywell-8ir103-pet-security-product

Yes external bell works find. Tamper works at pirs and yes it's a global tamper. I try not to but the old while your here can you have a look at this. The ones pir I took down had 12v at it. I did notice in the pir there was 2 eol connections with nothing in. Is that possibly why?.

On all 8 cables and only on the alarm cores? Tamper and voltage working as it should I only linked out 1 zone as was strapped for time

Hi guys I'm an electrician by trade but been asked to try sort an alarm out at the property I'm currently working at and was hoping some one could offer abit of advice The alarm panel is a honeywell accenta g4 and the pir's are honeywell 8IR103 When trying to set it just keeps beeping and doesn't actually set. When pressing the up arrow it gives all 8 zones in arming fault. When trying to do a walk test all zones are already 1 rather than changing from 0 to 1. I've factory reset the panel to default settings and still the same. I've took zone one out and put a a link in. The arming fault disappears on zone 1 and walk test is 0 like it should. What am I missing with the pic's? Are they compatible with the panel or is they a normally open or normally closed that needs changing? It's like the pir's are staying open and not closing. Also the leds aren't working on the pir's even though the jumper is set to on. Any help would be appreciated