AutomationEng

I programmed an i-onG2SM, in my office. PIRs door contacts, KEY-KPZ01 and network access. Everything worked OK. II then connected it to the actual system, replacing an old Ademco Galaxy. The only thing I didn't connect was the bell box. I also only had the keypad on a short wire, local to the box, while I tested everything else for a few days. This also worked. I have now connected the bell/ strobe and used the old wires to replace the Galaxy keypad with my KEY-KPZ01. For some reason the keypad will only constantly display the Eaton logo and an old date, and the navigation button rapidly flashes red. Pressing any key just causes a beep but does nothing else. The system still works through the Secureconnect app. but I can't do anything with the keypad. Any ideas would be much appreciated. Thanks in advance

Hi, I am trying to set up an Eaton Scantronic i-onG2SM panel. Everything works fine except the Quick Set. I have ticked 'Yes' to Quick Set, in the User Options but pressing the A, B etc. keys still require the user code to be entered to set the alarm. Am I missing something? Thanks in advance.