NellyBoy
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by NellyBoy
-
-
I have an ion40H and was installed professionally but the guy who fitted has passed away and it's wired in a way I just don't understand……
I have completely started again with it, as the sensors wiring is all differently wired colours wise and are using…..
3 × 6 core PIR wired
2 X 4 core PIR wired (which are linked together I think)
2 × door sensors Magnetic Wired
8 x radios PIR (These are a dream to set up and wish I had replaced them all to this type)
Have wired up box, keypad and panel and that's all fine, got onto the cloud and again radio sensors sets and all good, but with that wiring configuration, how would you wire the PIR/Door catch and double PIR and what to choose as wiring con fig at panel?
Have now changed all wiring at PIR’s to match, as that was confusing as hell.so now I have the following ….
red 12V
black Ov
yellow tamper left
blue tamper right
white nC left
green NC right
These are all New Scantronic Pet PIRs but I'm lost on how to wire…or what to use at PIR and Panel.....? As I have a mix of wiring 6/4 a dual line and 2 x mag door alarms
If anyone could please help, I would be much appreciated….Many many thanks in advance
NS
-
Sorry one more pic
so if you could tell me
1. what to change the PIRS to using what cables and where?
2. What wiring method to choose at panel? (4cc currently) for 5 pIR and 2 x magnetic door catches (4 cables on the doors)
3. how to wire at panel please
sending a blank panel pic if that’s easy for you to scribble on
Again thanks in advance this has been a right mare and neighbours kids studding for GCSE and I don’t think I’m the flavour of the month at present…..
thank you sir
-
-
Global Moderator
May ask you a question please?…….
I have an ion40H and was installed professionally but the guy who fitted killed himself and it’s wired in a way I don’t understand.
in your opinion I have complete started again with it as the sensors are using….
3 x 6 core
2 pir x 4 core (which are linked I think)
2 x door sensors
8 radios PIR (These are a dream to set up and wish I had replaced them all to this type)
Have wired up box, keypad and panel and that’s all fine, got onto the cloud and again radio sensors sets and all good.
but with that wiring configuration (In your opinion how would you wire the PIR/Door catch and double PIR?
have changed all wiring at PIR now to match as that was confusing as hell……
so have……..
red 12v
black Ov
yellow tamper left
blue tamper right
white nC left
green NC right
all New Scantronic Pet PIRs
but I’m lost on how to wire…..or what to use at PIR and Panel…..?
if you could please help and many many thanks in advance
NB
I-on40H wiring PIR & door Latch to panel confused……
in Control Panels (Public)
Posted
Gone down the resistor route, have no idea why they weren’t used to start with and your right 2k-4k
thanks 4 taking the time to reply
best regard