[Risco wired alarm system with front cover P/N GTEW021B]

The Powersonic PS-1230 arrived and I popped it in. All is now working perfectly again... I will re-deploy the NP7 12V 7Ah Yuasa battery into my UPS which happens to take exactly those batteries...

 

Thanks

SMc

 

[Risco wired alarm system with front cover P/N GTEW021B]

I have already ordered the thing...

 

Well the one in there was the same and lasted around 4 years...which may well out last me...!

[Risco wired alarm system with front cover P/N GTEW021B]

Like for like it is then...battery found and ordered from Amazon for delivery tomorrow...

Thanks for your help.

[Risco wired alarm system with front cover P/N GTEW021B]

Ok thanks Peter, so you advise that I should write off the NP7 and order the smaller one such as the existing flat powersonic PS-1230 if I can find one. I saw on Tayna they had a powersonic PG-12V5.4 with terminal types F1 F2 

 

thanks

SMc

[Risco wired alarm system with front cover P/N GTEW021B]

Hi, I have a Risco alarm system which is hardwired. The battery backup has failed so I bought a new replacement battery 12V 7Ah Yuasa NP7-12L 

 

I took the front cover off and was surprised to find a 12V 3.4 Ah battery inside. Although the 12V 7Ah Yuasa will just about fit into the casing, the alarm connectors are too small for the battery terminals. This looked like a red flag to me so I wanted to ask some advice...

 

Should I bin the bigger NP7 and re-purchase another 12V 3.4Ah battery  ?

 

Thanks

SMc