Redjason2373
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Redjason2373
-
-
Hi all,
Forgive my ignorance if I miss name anything, I have never had a alarm system previously and it is all new to me.
I have moved into a property that has a pyronix enforcer alarm system that I had serviced last month and is running smoothly. While the engineer was out I asked them about a control panel that was located by the front door which had no power/screen on. He said that this was not part of the Pyronix system and was likely an old alarm that was installed previously.
After some research online I found it was a eurosec panel and looked around the property but was unable to find any other items from the eurosec alarm system, the outside alarm bell has a different look to it compared to my neighbours. My neighbours matvh the image you get on a google search for Eurosec.
My question is, is there anyway for this panel to hooked into the Pyronix system? I'm looking to remove the panel and I tested the cables for voltage and got a oddly low reading and this has me wonderimg if it is still required or not.
Eurosec CP8LCD
in !!..DIY Installers..!!
Posted
Thank you for your replies. I will cut all the power at the fuse box to ensure all power is off before removing the panel and terminating wires in a back box and blank plate over the top.