Iand123
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Iand123
-
-
Thanks everyone. So I googled and found on here how to access the PM360 using the app and connecting to wifi. The errors are below (we have one siren, a front door contact and two motion sensors - hall and living room)
Front door - CNTCT Vanish (Guessing related to replacing the battery)
Living Room - motion sensor missing
Hall - motion sensor missing
Siren - tamper alarm (I removed the cover yesterday and out it back on)
KeyPad - tamper alarm
Siren missing
GSM Net Fail
GPRS Net Fail
im no expert but that’s a lot of things with alarms or missing so I’m making the assumption it’s going in the bin. Few people mentioned above but how do I remove this? Whenever weve unplugged the PM360 before eventually the siren goes off. As suggested above do I just take the siren off of the wall and smash it up with a hammer or sledgehammer? Is there a more elegant way or is it just brute force?
-
Hi all
I had an ADT smart home system installed but has been out of contract for about a year now (about 3.5-4 years in age). Has been working fine for all this time until tonight it will not let me arm the alarm. We have the PM 360 control unit which is plugged in upstairs and have a Visonic KP-141 PG2 handset/keypad that we usually set the alarm from. When we try to set the alarm it fails and when pressing the i button it goes yellow which the back of the keypad says is “trouble/memory”. As the subscription ended we lost access to ADT’s app so i have no idea how to find out more info and dont want to entertain any of their charges
WHat are my options? I replaced a battery on the door sensor we have a couple of days ago and seemed to work fine until tonight (it was setting/unsettling fine and the door sensor would trigger the alarm when opened if set). COuld that have messed something up? The other sensors haven’t been serviced for a while so the batteries could be low and have ordered new ones but if these dont make any difference am i somewhat stuck to find out more info without getting ADT involved?
Thanks in advance
ADT PM360 Trouble/Memory light - help please
in !!..DIY Installers..!!
Posted
Yep was all working fine. If I can remove it without damaging I’ll try and sell it on eBay
ha might just do this. When I take the lid of it has a warninG about electrics but it can only be the battery as it isn’t wired in. Assume just disconnect it and it’s fine? Nothing else I need to be aware of when disconnecting?