gazza_2
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by gazza_2
-
-
No I am sure it is done on the panel
-
Thanks for that James
-
al-yeti, that's what I was wondering
Are the Visonic one's classed as cheap?
-
Sorry when you say default setting is there a setting to make them better?
-
Thanks for that I did not know if i was going wrong somewhere. luckily I am keeping some of the wired ones for the E/E. Thanks again
-
Hi i am currently replacing my old alarm with a Visonic wireless system but after fitting some of the pet PIR's I am finding they are not very sensitive at all, they do work and I have moved them down the wall a bit but they still don't seem that good. Has any one got any tips or is this normal? Thanks a lot, Gary
-
brill thanks for your help all sorted
-
thanks so much will look in to that, do you know if that's a setting? sorry thanks for changing it for me i could not think how to word it
-
Hi i'm installing a visonic powermaster 30 and have problems with unlocking it with my user code on full set, it unlocks fine on part set and once the alarm activates on full set it will unlock. anyone have any ideas where i'm going wrong Cheers
-
Hi can anyone tell me if you can use a wired bell box on the powermaster 10 or does it have to be wireless I know you can add a module on the 30 but can't seem to find one for the 10. Just did not know if they was a way round it. Thanks
-
Hi looks a good forum just had to join and pick some great tips on the way as well as input to other members
Visonic PIR Sensors
in !!..DIY Installers..!!
Posted
yes I have just looked at it I think is on the panel event counter (event counter: Here you determine whether an alarm will be activated upon continued motion (low sensitivity) or upon a single alarm event (high sensitivity).. Optional settings: LOW sensitive (default) and HIGH sensitive.) is this correct as their is noting on the PIR itself