bowlingman
-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by bowlingman
-
-
21 minutes ago, sixwheeledbeast said:
You shouldn't need the Entry/Exit 2 Attribute on that zone as Guard Access.
The report is that Guard Access would not function at all after you part set several times but would work correctly again after the next full arm.
If it is definitely the issue your options are:-
a) Do not use Guard Access Zone Type and use the Entry/Exit 1 or 2 Zone Type. Using E/E 2 only has the benefit of selecting a different entry/exit time to the full set.
b) Purchase the kit required to update the firmware (flashing lead), contacting Texecom seeing if you can get a copy of the latest firmware to you and flashing it and hopefully not messing it up.
c) Get someone in the know to do Option B
d) Purchase and install a Smartcom which has the option to firmware upgrade via the app now I believe.
e) See if where you sourced the kit from will help
The e/e2 option was put on by the panel I am using zone 2, I will remove this and see if things improve tomorrow when I can get the wife out of the way !
If need to follow option b it will come down to if Texecom are happy to talk to me.
-
22 minutes ago, sixwheeledbeast said:
Attributes for each Zone I would expect only (Omittable and Access to be on)
Version number should be on a sticker on the main processor. Or menu and 4 together
You "may" have run into a software bug if you are on version 5.01.02, this was patched in 5.02
The version number is LS1V5.01.03
Atttributes1 on this zone is omittable, access and enrty/ exit 2
The bugg you mention did it cause this sort of problem.
-
12 minutes ago, sixwheeledbeast said:
Is it an intermittent issue?
Do you have any other attributes enabled?
Are you running firmware V5.01.02?
It is a problem most times but it does operate correctly the odd time.
Attributes I have two zones in area B.
The firmware on the box is 5.01
-
My Texecom Premier Elite has thrown up a odd problem.
I have one zone programmed as zone access it is the first active detector that is walked past when getting up in the morning the system being in part set mode.
It should trigger the entry timer but most times it fails to do so and has no effect on the system.
I have substituted the detector and resistors but with no improvement.
I have tried it connected to a spare zone again no change.
In all other ways operation is normal ie on full set it alarms instantly if tripped directly, it allows access on full set when entering through the entry door and on walk test it again operates normally.
It is a new panel.
Any observations will be received very gratefully.
-
Thanks all for your comments its very much appreciated.
I have now installed and commissioned the system on my own it just took time to get the little gray cells into the programming.
As was suggested I have powered all aux. with a separate ps.
Its a very good system I can certainly recommend the Texacom Prem.
-
25 minutes ago, sixwheeledbeast said:
If they are on the Expander then you have to also assign the expander to A and B in the same way too.
Not clear what you want to adjust RE banner message but it's part of the regs that the display doesn't show if an Area is armed
I understand the requirement of the regs. and the display conforms to this in full set and unset.
Its when I part set it that the display flashes from time to part set banner continually.
I have programmed the exp to both A and B like I did the keypad.
-
Thank you sixwheeledbeast I now have system working from one kp controlling the separate areas on separate codes.
I had to transfer the two zones being used for area B to the main panel as I could not get it to function on the expander but all area A zones operate ok on the expander.
I still have the system on the bench now programmed ready to transplant into my property.
As a result I am able to arm it without of course leaving view of the kp, I observed after arming on full set the kp display toggles between system set and time for a while before settling to just time, however on part set it toggles in a similar fashion but never stops is there an adjustment for this please.
-
1 hour ago, sixwheeledbeast said:
They need to be in Areas A and B a bit like what you did in Zone Setup but in Keypad and User
Thanks I will have another go tomorrow
-
43 minutes ago, sixwheeledbeast said:
Keypad and user needs permissions to arm those areas.
It's default setup to have separate keypads for separate areas.
Thank you for your reply, how do I programme the system to give me permissions to use one kp.
-
23 hours ago, sixwheeledbeast said:
Zone Setup > Select Zone you want > Area Clear the (Area) A and replace with B using 1 and 2 keys. Repeat
Areas may not be the best way to achieve what you want. Areas you should consider as separate self contained alarm systems controlled from one panel where as you may want part sets.
I have tried the above programming but it does not work.
When I try to arm the second area B all the system does is a quick audible squawk and returns to unarmed.
-
Thank you both for your comments, yesterday I have managed on my own to crack the system apart at the moment from one thing.
So following al-yeti suggestion here it is.
I have 16 zones all working as required in the full set A mode, the system allows for 2 separate areas which should be able to be set individually or together.
I req. zones 11 and 12 to be in the second area, so I can arm them on their own or arm them when req. with the rest in full set.
I have been unable to achieve so far, can anyone take me step by step to set this up.
-
Its been 15 years + since I retired and I used fit and work on Gardtec and Honeywell Galaxy systems without trouble.
However my brain box must have really slowed more than I realised because the Texecom Elite panel, expander and kp I have purchased to replace an old set up has me pulling my hair out.
I have it operating on my bench only in a basic state I cannot find my way around the programming at all, I have the full installation manual.
Is their anyone who lives in or around the Leeds Bradford area who is familiar with the Elite and would be kind enough to assist me in setting it up on the bench, then I can install the system myself in my home.
It is to be a bells only system.
I will be very happy to reimburse them for time and trouble.
-
3 minutes ago, MrHappy said:
its on every zone
Do you mean is in the zone type setting somewhere
-
Having my silly mistake of wrong way round resistors pointed out so kindly earlier today can I ask another question of you please.
On page 32 of the installation manual it shows the default resistor wiring, on page 60 it lists under zone wiring alternate resister options I require option 5 to suit my existing detector circuits from my old Gardtec.
I cannot locate where in the programming this option is, its probably my old age again !!
Thanks in advance.
-
I apologises gents as soon as I read Sixwheeledbeast replay I realised my mistake I am mixing up my resisters!!
Thank you both very much for your lightning fast responses.
-
Thank you for your very quick response
The 2.2k resister is only in circuit when a detection device operates and all the panel can " see " otherwise is 4.7k
So the system as I have on the bench should arm normally but it will not.
-
I have purchased a new unit and before full install in my home I have connected it up on the bench to familiarise myself.
I have endstation one expander and one kp.
I have followed the manual and programmed the system linked all 16 zones with 4.7k resisters quit engineering and gone back into standby mode and all is well kp display normal.
However when I attempt to arm the display scrolls through the zones stating they are active and will not arm, turning all zones off the system it arms as it should, but even with just one zone on it will not arm.
But in standby/unset mode everything is ok, disconnecting a zone resister causes a tamper as you would expect.
I am scratching my head can anyone advise please.
-
What ps would be best and how should I wire it into the system please
-
I was not expecting that.
Is the ps small on the endstation
-
41 minutes ago, MrHappy said:
How many speaker or external Sounders are you using?
One internal speaker
One external sounder
-
Yes however I now plan to use only one kp adjacent to endstation, only two expanders one at a cable distance around 10 meters and the other at around 15 meters.
Expander one will have two contacts and a dt on it, expander two will have two contacts.
The endstation and kp will have six movement detectors plus three contacts plus pa button.
-
Thank you all for your advice.
I have decided I am going to up date and thanks to datadiffusion suggestions I am considering a Texecom Premier Elite in polymer caa-0026
It allows 2 areas and that could work for me.
First I would like to study the installation manual so as to familiarise myself with the wiring etc req. how and where can I obtain one please.
Secondly where would I find the best supplier please.
-
4 hours ago, aissecur said:
just out of interest have you measured the AC supply on to the pcb? Should be between 18 - 20VAC
Its 18.5v
-
1 hour ago, Logan said:
i have a gardtec 595 in my collection. I need to find a keypad to test it
I would be very interested in it
Guard Access Not Activating
in !!..DIY Installers..!!
Posted
Thank you sixwheeledbeast and others for your interest and advice.
My system is now running correctly having had the firmware updated via a smartcom unit.
It was a bug in the firmware causing the difficulty, as regards entry time 2 this must be enabled when using guard access.
The tech. dept at Texecom could not have been more helpful and I would recommend Texecom products and service plus they are made in the uk.