SeanT

You should be able to set them up like this

There are various versions of the user manual that have slightly different commands, such as A and H for arming and disarming (as you found out). The manual I have uploaded is as close to my original paper copy as I could find, however, it is slightly different but for most things it should be ok. Risco_Agility_User_Manual.pdf Heres a link I found that matches my manual dated 2012, the previous one is 2009: https://irp-cdn.multiscreensite.com/a1d869e9/files/uploaded/Agility-2-Full-User-Manual-UK1.pdf

Glad it worked, I think its just P for part set, have a look at the list below: I'll see if i can find a link to the update manual for you

I think you’re using the wrong commands to set and unset your alarm, you should be using S to set and US to unset so if your code is 1234 then you would use 1234 S to set and 1234 US to unset (I don’t think it’s case sensitive and you can omit the space if you want to). There is a list of commands in the user manual. Hope this help

Can’t really comment on that as I don’t have my system set up like that but hope it works

ok, I think you need to go into engineers menu using * 0132 Then go into programming # Then system # then controls # the communications # Fm enable half unlock symbol (y/n)

Yes you can, I used m2m (machine 2 machine) they ensure you sim will never expire

Got it sorted, it’s in the user Manual rather than the engineer Manual, just in case anyone else has the problem this is how it’s done: You send the following text to the sim in your alarm. code FMPHONE n NEW number code is the user code for arming alarm. n is the follow me number, I used 1. number is the number you want texting.

Managed to enable follow me which had opened up a number of menus but still can’t find where I set the follow me phone number which I assume is the number the agility calls to send the sms to

It does only text but it needs a number to send the text to, I can’t find where I set this number which would be my mobile number

Hello, I’m new to the site, installed my Agility system about 4 or 5 years ago and just recently got broken into, anti snap locks now fitted!!! i have just added the gsm module so I can be texted when the alarm goes off but i can’t find where I set which number it should call (my number), it’s all working as I can text the sim and set/unset the alarm but that’s not really why I got it. I have a feeling it under the follow me menu but when I try going into the menu it displays “Not Available”, anyone got any suggestions before I contact Risco tech help and make myself look a fool?