Gregory
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Gregory
-
-
I've moved the terminals into the speaker terminals, no joy. I've also rechecked the resistance on it's leads and the reading is still zero.
-
Hello sixwheeledbeast,
Thank you for replying, there are no speakers wired to the speaker terminals. The only speaker is the built in one that came with the panel that is wired to 13v+ red and 0v black as it was when I received the panel. The resistance measured on it's leads is zero, whether on test or not.
-
Hello al-yeti,
Yes that is correct, no sound from buttons when setting or entry/exit
-
Hello,
My first time posting so hi to everyone. I have just finished installing an Optima gen 4 alarm system. Everything went well and the system works well. The only problem is that there are no warning tones from the panel speaker on exit/entry even though the timers are working and the alarm sets correctly. In alarm test mode, pressing 3 should sound the panel speaker but while the LED lights up, there is no sound. Any help in resolving this would be greatly appreciated.
Optima Gen 4 Panel Speaker
in !!..DIY Installers..!!
Posted
Hello
I had come to the same conclusion that something has blown. The speaker connections are intact and haven't been touched at the speaker end. I have spoken to the supplier and they are sending out a replacement panel tomorrow. Thank you for the replies to my request.