Oli_me
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Oli_me
-
-
Thank you for your reply’s, he didn’t appear to be just fobbing me off, he did ask me what else was on the Bell, and seemed to be referring to some technical data and said it will be fine as the master blaster relay doesn’t draw much current 1.0A I think. I did say shouldn’t it be in a different port, and he said I’m over complicating it. He asked me to check on the panels menu and confirmed it’s a premier elite 24. No he didn’t mention the noise and the time it could be going off for, although I’m pretty sure the bell is set for 20mins, but where I am I don’t think noise is going to be an issue, and if it is and someone is breaking in then I’d be glad for anyone to turn up and see what’s going on!!
If somone could guide me through how to wire it into a different trigger port like one of the digi’s And how to program it then I’d be more than keen and happy to change it as I’m not an expert and you guys know your stuff
-
Hi all, I spoke to Texecom support earlier today, they were really helpful
told me to wire the negative into the Bell terminal, and the positive into 12V +
they said the relay in the master blaster doesn't draw much and will be fine. Happy days
and yup tested it...... ouch it's loud
-
Surely there is a relay in the master blaster, well when toy power it with 12v you can hear the relay click. So surely all I need is a connection on the panel that supplies 12v under alarm conditions?
-
3 minutes ago, james.wilson said:
Give it 240 and wire the relay to the bell output. Or Give Texecom a call
Both products are under Texecom now
I've got it connected to the 240, and on the master blaster side black to negative and red to positive. there is a wire already connected to the "bell" terminal and didn't was to over load it. plus why would someone say it needs to be connected to the digi outputs?
-
10 minutes ago, datadiffusion said:
Been done before, though tricky. Below is a simplified version of the more popular interface sold by Bentley, suitable for home production;
Thank you for your reply. I don't follow the attached pic, not sure we're on about the same thing!?
-
19 minutes ago, PeterJames said:
Why would you think its a long shot? I suspect that most on here would know how to do it
Long shot because I was let down by the person who installed the alarm, and guess I don't feel lucky that I'll get it sorted online
fingers crossed though
-
Hi, I know it's a long shot and a bit vague, but does anyone know how to wire in a klaxon master blaster to a texecom premier elite 12/24? the main part that i'm struggling with is which terminals to connect the wires to the panel, and how to program it to work. Someone said that I need to wire the positive into one of the digi outs!?
Thank you in advance for your help
-
11 hours ago, al-yeti said:
Probably because com2400 primary function isn't being a speech dialler
Is that changeable? If so what's the process?
-
On 27/08/2017 at 18:59, installer_dale said:
As u already have the com2400 then u can add the speech module to it (goes inside the panel) which allows it to ring you instead of only texting.
The speech dialler and speech and text dialler is a standalone product that looks like a keypad which can ring and text you when it receives an input from any make of alarm. Old product tried and tested but nothing special.
If you want a second backup communicator (which rules out speech dialler as it's connected to the same phone line as the com2400 as well as ip) then get the speech module for phone calls and also a Comgsm that will give you two way texting over gsm with a pay as you go simcard.
So the speech dialler, and speech and text dialler (keypad) is required regardless? And with just it and the com2400 it won't call me? I still need to add a speech/voice module (CGE-0001)?
-
So if I want it to ring me I still need to add something? The kepdad and con2400 isn't enough?
-
Thank you for all of your replys, I'm still a little confused, what does the keypad have to do with things? They are listed as speech + text dialler!?
All I really want it to do is physically call me like my old Visonic did pretty well to be fair,
-
I'm sure he fitted a PSD-001, and connected the phone line to the com2400 in the main panel, yet all it does is text me, and even that isn't brilliantly reliable
I want a phone call, and then an SMS unit separate in case phone line is cut,
-
If I add the CGE-0001 in connection to the com 2400, should it ring and text me at the same time?
I google speech dialler, and the results seem to come up with the the panel for around £80!? -
What are the best best methods? I think he put a com2400 in the panel, guess this only does text?
-
Hi everyone, I'm new to the site so hope I'm posting in the right place!?
I have a Texecom premier elite 24 alarm installed by a friend, who works for a security company, but is unreliable and isn't getting back to me with the questions I need answering.
long story short is the alarm texts me for events, I really want it to call me instead, what comms module or speech dialler do I need?
Hope this makes sense and I look forward to your help.
Oliver.
told me to wire the negative into the Bell terminal, and the positive into 12V +
fingers crossed though
Klaxon Master Blaster
in !!..DIY Installers..!!
Posted
Sorry forgot to add the model is klaxon SLM-0001