[Oops I cut my alarm cable - Help please]

Hi all

 

i did what Peter James said put green cable in terminal 7 and spliced yellow & blue together system back up and running 

 

thanks

 

[Oops I cut my alarm cable - Help please]

You superstar!

[Oops I cut my alarm cable - Help please]

Hope someone can help

 

I was getting some work done in my kitchen and found a loose white cable that didn't go anywhere so I traced it back to the wall and cut it guess what the alarm went off!

 

I traced the other end of the cable and turns out it went into a pir sensor in another room the loose end of the cable I can now only assume went to a sensor for the back door that end of the cable must of had all 8 cables twined into one as only one cable was sticking out

 

i thought the simplest thing was to disconnect the cut cable from the pir sensor and the alarm would work again.  The problem I have as picture shows is I have 3 cables left but only 2 terminals left. The yellow, blue and green left were twined together with cable I cut and removed and were not wired to any of the terminals like the rest of the cables

 

I have a optima xl6 alarm and although I can disable the alarm with the code one disabled the panel is unresponsive and I can't set the alarm

 

I know I'm an idiot but could some one advise what to do with the 3 remaining cables to get the alarm working again

 

Many thanks