Colhay
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Colhay
-
-
I tried one on a short lead from the control panel and its still the same. As soon as powered up just brings on status LED. All PIRs are getting the same voltage around 13.6V.
Maybe I just been unlucky getting a dud batch
-
Bought from here http://www.easy-light.com/
I will email then on Monday about returning them. Just seems a pretty high fail rate. I would have been better off keeping the old ones
-
Hello,
Anyone experience with these Premier Elite IR PIRs (AFD-0001).
I just installed a new Premier 48 panel and thought I would change out the old manky looking PIRs that are probably 10 plus years old for some new texecom ones. On power up 2 work fine,3 of the 6 have status LED lit all the time and dont change state during a walk test. The final one has a dim glowing LED but does get bright when activated and seems to work ok during the walk test.
They are all wired the same and jumpers were all set the same before power up. Anybody else had problems with these units? Seems a very high failure rate for new units but I fail to see what I could have done to cause any problems to the new units
Texecom Premier Elite PIR 3 out of 6 fail on power up
in !!..DIY Installers..!!
Posted
Sorry I should have elaborated. The PIR alarm contacts dont change state at all. Im sending them back there is nothing more I can do with them. Thanks for all the replies