spike1947

Hi Guys Thank you all for your help , will put all that info in my brain and test it out tonight and hopefully come back here and thank you all and mark it has solved . spike

Hi Peter Thanks again for all your help , When you say set up each camera , what do you mean ! is it that I power up each Camera and then log into the Router to see if the camera ip address is showing ! . spike

Hi again James Thanks for your reply , no have not done that , will try when I am back at the farm later . tks spike

Hi Peter Thanks for your reply , not sure what you mean , there is a ip address for the camera as in my above post ! . spike Hi James Thanks for your reply ,yes I am doing it through Hubble web site that is what the manual said to do , to set up the camera's on my i-phone via wi-fi to the router ! , but I am not getting anything on my pc , not really sure what I should do, there was not any drivers for these and none showing on the Motorola web site ! . spike

Hi Thanks for your reply , sorry for the delay in answering , not sure what you mean really on that point , when I go into the router set up info ,it is showing LAN ip Address for Camera as 192.168.1.103 and the PC as 192.168.1.183 . tks spike

Hi I have 4 Motorola Focus 73 cctv cameras , I set one up via wi-fi with my i-phone and works ok , , but I need to set two up away from my wi-fi signal ( in the farm out buildings )using a power adapter and see the camera on my pc , they are speaking to each other showing all green lights ,but I can not get to see the camera on my pc , is there a different set up to use for seeing the camera on my desktop pc ,the instruction manual is very vague on pc info spike