Jump to content
Security Installer Community

Avago19

Member
  • Posts

    10
  • Joined

  • Last visited

Location

  • Location
    Kent

Avago19's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi Jameswilson, I see that your option would work too...... If my £15 float option fails then I'll try it. Thanks pro's.....appreciated.... and great forum...
  2. Hi Nova, thanks for your advice. I've looked into this but these require power to which I don't have in this location. (see orig posting) Float moving up shaft to trigger event I think will be acceptable for this situation. Interested to see what a powermax one receiver is ?
  3. Panel only been installed 2 yrs I'm told. client has big system with the remote lcd keypads etc only available on the powermaster. Don't think its viable to tell them to spend money ripping panel out just for a flood detector addition as spent £3k putting it al in!!!! Can you send me a link to the Powermac One you are referring me to ? Can't locate! Thanks
  4. …….. thanks….. but this is not compatible with the powermaster range, only powermax. Confirmed by Visonic….. They suggest using door contact auxiliary input…. so I am thinking connect this > http://www.ultrasecu…lood_float.html to the N/O contacts for the trigger... thoughts please and appreciated ?
  5. please explain ? will this work http://www.ultrasecuredirect.com/acatalog/water_flood_float.html? thanks
  6. may have answered my own question - http://www.ultrasecuredirect.com/acatalog/water_flood_float.html
  7. thinking about it, why don't I cut off the 2 wire probe from a cheap ebay water sensor and then just connect that to the aux in N/O contacts ? thoughts ?
  8. Hi jameswilson thanks for your quick response… Do you have any suggestions on how to overcome this problem and fit a flood detector back to the panel ? (wireless or wired). thanks
  9. Hi, apologies if this may of been duplicated before but I cannot find the answer I require. I have a client with a Visconic Powermaster installation and they require a flood detector..... Easy I thought as they are listed as an option, but buying one is a problem as they are not available in the uk for the powermaster. Having spoken to Visonic there are no planned dates they can give as to when it will be released. In the meantime I am thinking I can use the aux input on the door contact module and hard wire a flood sensor to that... Does anyone know of a suitable sensor with a N/O output contacts that would be suitable. (There is NO provision for power in the basement so looking for a passive device) Thanks in advance.
  10. Hi, apologies if this may of been duplicated before but I cannot find the answer I require. I have a client with a Visconic Powermaster installation and they require a flood detector..... Easy I thought as they are listed as an option, but buying one is a problem as they are not available in the uk for the powermaster. Having spoken to Visonic there are no planned dates they can give as to when it will be released. In the meantime I am thinking I can use the aux input on the door contact module and hard wire a flood sensor to that... Does anyone know of a suitable sensor with a N/O output contacts that would be suitable. (There is NO provision for power in the basement so looking for a passive device) Thanks in advance.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.