[Castle Care 1600 Alarm Control - 2Nd Try At It.]

SORRY ABOUT THE INCOMPLETE POST ABOVE 

 

Hi

 

Thanks for your reply my problem is I do not understand the "theory" of how to design this. If I knew this then I can program from the manual. For example, you know the scenario therefore what steps do I need,  would it be:

 

a. Program 1 sensor for 1st zone (Room 1)

 Entered programming mode , selected let's say zone eleven as 11#

 select it's attribute so in case of rooms you would set them to intruder

 

b. Program 1 sensor for 2nd zone (Room 2)

Entered programming mode , selected let's say zone twelve as 12# 

select it's attribute so in case of rooms you would set them to intruder 

 

c. Program final sensor 3rd zone (This will be the final door / exit zone)

Entered programming mode , selected let's say zone thirteen as 13#

attribute would be Entry-Exit

 

Then I program:

 

The EXIT time for leaving.

The ENTRY time for entering.

 

 

Is this the complete design or have I missed anything out ?

 

I do not have a problem programming what I need is the design steps for my scenario. Once I have that I can program from the manual.

 

 

Thanks

 

Joe

 

[Castle Care 1600 Alarm Control - 2Nd Try At It.]

Hi

 

Thanks for your reply my problem is I do not understand the "theory" of how to design this. If I know that then I can program from the manual. For example, you know the scenario therefore what steps do I need to follow would it be:

 

a. Program 1 sensor for 1st zone (Room 1)

[Castle Care 1600 Alarm Control - 2Nd Try At It.]

Hi

 

The scenario: 

 

1. There are 3 sensors, 1 in each room.

 

2. The battery has been replaced by a new 1.

 

3. How do I program the Castle Care 1600 Alarm correctly?

 

4. Are the steps involved:

 

    a. Program 1 sensor for 1st zone (Room 1)

    b. Program 1 sensor for 2nd zone (Room 2)

    c. Program final sensor 3rd zone (This will be the final door / exit zone)

    d. Program the EXIT time for leaving.

    e. Program the ENTRY time for entering.

 

5. For each of the steps above what is the programming sequence. i.e. 22# etc.

 

6. If somebody can spend briefly no more than 10 mins I would be grateful.

 

7. I do not want redirections, links, manuals, installation instructions etc. I have that already.

 

 

Thanks in advance

 

Joe

[Castle Care 1600 Alarm Control]

Hi

 

I phoned www.securitywarehouse.co.uk and they were unable to help me with the programming of the 'final door', hence no luck.

 

 

Therefore:

 

 

1. How do I now program the alarm so that when I shut the main door the beeping stops and the alarm is activated ?

 

 

2. Do I need to program the exit and entry timers?

 

 

 

Joe

[Castle Care 1600 Alarm Control]

Hi All

 

No luck with  www.securitywarehouse.co.uk

 

 

 

How do I now program the alarm so that when I shut the main door the beeping stops and the alarm is activated ?

 

Do I need to program the exit and entry timers?

 

 

Joe

[Castle Care 1600 Alarm Control]

Hi All

 

I have managed to get the default code changed, finally. 

 

 

How do I now program the alarm so that when I shut the main door the beeping stops and the alarm is activated ?

 

Do I need to program the exit and entry timers?

 

If so any help would be useful.

 

 

Thank you all in advance.

 

Joe

[Castle Care 1600 Alarm Control]

Hi

 

So from p13, section 6.2

 

If I want to change the default alarm code of 1234 I do:

 

a - Enter 2222# (To access Manager mode) 

b - Enter 11# (To change the default alarm code)

c - Enter my new alarm code

d - Press * to return to normal day mode

 

 

Thank you all, once again for your time and effort.

 

Joe

[Castle Care 1600 Alarm Control]

Hi

 

I have tried page 13 of the manual however I can only change the Manager's code.

 

What I need to do is change the default alarm code, 1234, to my preference. Therefore, how do I achieve this ?

 

 

Thanks in advance.

 

Joe

[Castle Care 1600 Alarm Control]

Thank you I will try it and see.

 

 

Joe

[Castle Care 1600 Alarm Control]

Hi

 

The default code for arm and disarm is 1234# how do I program a new code into the Castle Care 1600 using the keypad?

 

 

Thank you in advance.

 

 

Joe