Jump to content
Security Installer Community

JoePublic

Member
  • Posts

    10
  • Joined

  • Last visited

Location

  • Location
    UK

JoePublic's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. SORRY ABOUT THE INCOMPLETE POST ABOVE Hi Thanks for your reply my problem is I do not understand the "theory" of how to design this. If I knew this then I can program from the manual. For example, you know the scenario therefore what steps do I need, would it be: a. Program 1 sensor for 1st zone (Room 1) Entered programming mode , selected let's say zone eleven as 11# select it's attribute so in case of rooms you would set them to intruder b. Program 1 sensor for 2nd zone (Room 2) Entered programming mode , selected let's say zone twelve as 12# select it's attribute so in case of rooms you would set them to intruder c. Program final sensor 3rd zone (This will be the final door / exit zone) Entered programming mode , selected let's say zone thirteen as 13# attribute would be Entry-Exit Then I program: The EXIT time for leaving. The ENTRY time for entering. Is this the complete design or have I missed anything out ? I do not have a problem programming what I need is the design steps for my scenario. Once I have that I can program from the manual. Thanks Joe
  2. Hi Thanks for your reply my problem is I do not understand the "theory" of how to design this. If I know that then I can program from the manual. For example, you know the scenario therefore what steps do I need to follow would it be: a. Program 1 sensor for 1st zone (Room 1)
  3. Hi The scenario: 1. There are 3 sensors, 1 in each room. 2. The battery has been replaced by a new 1. 3. How do I program the Castle Care 1600 Alarm correctly? 4. Are the steps involved: a. Program 1 sensor for 1st zone (Room 1) b. Program 1 sensor for 2nd zone (Room 2) c. Program final sensor 3rd zone (This will be the final door / exit zone) d. Program the EXIT time for leaving. e. Program the ENTRY time for entering. 5. For each of the steps above what is the programming sequence. i.e. 22# etc. 6. If somebody can spend briefly no more than 10 mins I would be grateful. 7. I do not want redirections, links, manuals, installation instructions etc. I have that already. Thanks in advance Joe
  4. Hi I phoned www.securitywarehouse.co.uk and they were unable to help me with the programming of the 'final door', hence no luck. Therefore: 1. How do I now program the alarm so that when I shut the main door the beeping stops and the alarm is activated ? 2. Do I need to program the exit and entry timers? Joe
  5. Hi All No luck with www.securitywarehouse.co.uk How do I now program the alarm so that when I shut the main door the beeping stops and the alarm is activated ? Do I need to program the exit and entry timers? Joe
  6. Hi All I have managed to get the default code changed, finally. How do I now program the alarm so that when I shut the main door the beeping stops and the alarm is activated ? Do I need to program the exit and entry timers? If so any help would be useful. Thank you all in advance. Joe
  7. Hi So from p13, section 6.2 If I want to change the default alarm code of 1234 I do: a - Enter 2222# (To access Manager mode) b - Enter 11# (To change the default alarm code) c - Enter my new alarm code d - Press * to return to normal day mode Thank you all, once again for your time and effort. Joe
  8. Hi I have tried page 13 of the manual however I can only change the Manager's code. What I need to do is change the default alarm code, 1234, to my preference. Therefore, how do I achieve this ? Thanks in advance. Joe
  9. Hi The default code for arm and disarm is 1234# how do I program a new code into the Castle Care 1600 using the keypad? Thank you in advance. Joe
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.