craigstory

some old 480tvl camera's and views on picture quality and just general build quality of the item

What are peoples views on this camera looking at getting them to replace a existing setup

can you ping the DVR on the internal network? alternatively you could try set the DVR as the DMZ in the router and see if that allows you to access it which would then indicate a problem within the routers port forwarding.

I'm sure if I got some advice id easily be able to fix it myself.

Then wouldn't this forum be a complete waste of time and it's obvious that you have too much of it anyway making pointless comments

Just to note they all back to the same room and obtain power via a 24 camera panel psu

What would the cause of the issue be and what would the solution be? Camera is fine if it's plugged direct into DVR with fly leads

my friend had a system installed by a company a few years ago, but recently seems to be having problems with the camera's where it seems to ghost some of the picture onto another camera, it only seemd to do it on 2 cameras so tryed changing the PSU but still seemed to be the same it only happens on 2 camera's tried swapping onto different channels at the DVR but still the same. camera one has white lines running accross it and camera 2 seems to have the white lines running accross but you can kind of see the picture from camera one on it any idea's? thanks