[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

Ok may be its time to change it but after investment of two lcd keypads extras this is quite expensive I have 8 hard wired zones (2 door 1 pir and 5 window shock sensors) and 8 wireless zones. What do you people think of the the risco Lightsys this would probably work with my existing equipment.

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

I would if it would let me

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

Sorry looked at wrong menu there is a fault system clock N

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

Ok I have looked into fault codes can someone tell me what P1 ET means

Thanks

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

This system took a while to program to work just right I don't fancy doing it all again for the sake of a simple anti code. I wish I had downloaded the software when I had access to risco site. I will pursue tying to find someone willing to help in the meantime I have CCTV which I can access remotely to keep an eye on the place.

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

I have both grand master and engineers codes and they will not let me access any area

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

I installed it myself about 4 years ago

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

Ok I think I found the problem but need help

I need a anti code to reset the system

Can anyone help Me with a copy of the software

[New Router And Risco Cloud]

I would say you first need to reboot the router first

Does the the router see the pannel?

Is the router using a static ip for the pannel or is it DHCP?

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

Hi yes I did install the system so I have all the codes it just will not let me in when I go to menu 7 engineer/advanced I previously had no problems getting into the system to make changes like adjusting system time.

Just all a bit strange

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

Can't see how to do that can you expand

Thanks

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

Sorry just to add it says call engineer and the tamper logo is on

[Risco Prosys 40 Will Not Except Gmc Or Installer Code]

hi I did a general service of my alarm this and replace the CP battery as it was getting on to 4 years old as a precaution after which the system rebooted but would not except GMC I then thought it may have defaulted but that did not work either I can enter the engineer menu either option 7 as the engineer code will not be accepted it just bleeps after code entry and goes back to menu.

Any help appreciated

Raj