bassman59 Posted March 11, 2011 Share Posted March 11, 2011 Hi guys, I have been instructed to install an access control on a door to an office block. There is an existing Terraneo 608 system which is working fine. I have to link the systems and hopefully someone can help me. I've searched for a manual online but cant find one. I have opened the handsets (8 in total) and find that they are all wired the same way and have terminals marked from left to right as follows 6 T 4 3 2 1 . The handsets terminals are all connected except 4 (no connection ) Does anyone know which terminal is used to output to a lock. There is a black rectangular button in the bottom right corner of each handset and I need to use these to trigger my system via an AC relay. Any help would be gratefully appreciated bassman59 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/31196-old-terraneo-608-system/ Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.