[9651 internal speaker stopped working]

On 22/12/2022 at 00:18, dave6083 said:

 Hi yes it makes all the sounds but very dim from the keypad but not from the speaker. I chk the resistance from the chime wire after removing it from the pcb and it shows none. Also there is no countinouity from the speaker. I changed the door contact switch as well.

Any suggestions plz or is it the speaker itself guys?

 

 

 

 

 

 

On 22/12/2022 at 00:18, dave6083 said:

Thxs james

No all the wiring to the speaker is intact

I can suspect may be the door contact

Entry/exit. Other than that i dont know what....

 

 

 

[9651 internal speaker stopped working]

On 20/12/2022 at 10:35, james.wilson said:

Id assume you have discconected something.

Check your int speaker connections are ok, then the cable with a meter

Thxs james

No all the wiring to the speaker is intact

I can suspect may be the door contact

Entry/exit. Other than that i dont know what....

 

 

[9651 internal speaker stopped working]

I just removed P.A. from my counter side as we change the carpet. The door was bit sticking under the carpet .it was opened  with a slight push. The P.A and rest of the system works fine but the internal speaker stop working. I checked everything from the programme manual nothing works. Is it some fuse or mainEM board problem? Guys your support will be appreciated..

Thanks

ITS A SCANTRONIC 9651 (2009) SYSTEM