[No zone 5 pir working]

35 minutes ago, PeterJames said:

Im guessing you have two? the second is probably a dummy box with deterrent leds 

Ok thankyou I’ll go up and check tomorrow.

[No zone 5 pir working]

Just now, Rich Lindley said:

 

Brilliant thanks for help lads

Yes the led must have failed as it still sets alarm off.

the bell box with green light rings but bell box with red Light doesn’t.

[No zone 5 pir working]

25 minutes ago, PeterJames said:

No they are all normally on the same aux fuse with an Accenta, in any case they fail in alarm so you would not be able to set it. As SWB says the Leds on the BB may be indicating a problem but it would be unrelated to the pir, try setting it and moving around in front of Z5 if the alarm goes off the Led on the detector has failed, that would also give the bell a test at the same time.

 

[No zone 5 pir working]

It was inspected July time when it was working fine,would only 1 pir go out if a fuse had gone or would it take all pir’s out?

also could the red light on bell box be a fuse?

[No zone 5 pir working]

Thanks for your time peter

The one bell box has green strobe light moves left to right,the other used to too but now it flashes red.pir in room 5 doesn’t light when you move like in other 7 rooms.

[No zone 5 pir working]

Hi I wonder if anyone can help me ….I noticed one of my two outside bell box flashing red. Just looked and zone 5 pir not working.

it’s an accenta G4 mini and thesystem sets and unsets fine .

[Accenta 8 - All Lights On]

Thanks for your help

[Accenta 8 - All Lights On]

No just found fuse it’s fine,all sensors light up fine I’ve obviously done something wrong as there’s a load beep when I try and press the  4th number of any code. The 3 numbers go in fine and there seems to be an error noise on the 4th number.

[Accenta 8 - All Lights On]

Thankyou mate

I’ll check fuse then any idea where it will be?

[Accenta 8 - All Lights On]

Can anybody help please?

I have an Accenta 8 EP 416 led keypad. Before Xmas we converted garage to a bedroom so today was trying to add garage sensor to the night omit program.

now it’s not doing anything and the spanner lights illuminated it’s stopped responding to anything the only light not illuminated is the sos one.