[+Bat Mis 0001 - Error On Galaxy Alarm]

possible and thanks for taking  the time to share your advice. steve

[+Bat Mis 0001 - Error On Galaxy Alarm]

 Voltage with my meter indicated 12.78 volts and 385ma, really strange went to set the alarm this evening - stuck in engineer mode due to error message 

of +batt missing 0001 has cleared by itself. So took alarm out of Engineer  mode and it reset with no tamper errors or batt errors and reported 6 modules before and after and all ok. So don’t know what has happened between this morning and this evening but it seems ok. So let’s hope all is well. And big thanks for the swift reply earlier 

 

[+Bat Mis 0001 - Error On Galaxy Alarm]

 Voltage with my meter indicated 12.78 volts and 385ma

[+Bat Mis 0001 - Error On Galaxy Alarm]

Wonder if any one has any other  suggestions, as I’ve replaced the main 12v battery in the control panel with a brand new one today and the error message will not clear down on exiting engineering mode